Oki MB471 Users Manual Basic - Page 136
Secure the transcription unit to the, printer by rotating both handles of
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Paper Jams 4 Carefully lift out the image drum, complete with the toner cartridge. Be careful not to touch or scratch the green drum surface. 8 Insert rear projections , located close to both handles of the transcription unit, into both mounting holes of the printer. 5 Remove the Image Drum as described in step 3, then, remove the Duplex unit (1) by raising the coloured handles (2) on each side, and then by holding the handles and gently lifting it out. 9 Secure the transcription unit to the printer by rotating both handles of the transcription unit in the direction of the arrow of . 6 Remove any paper and replace the duplex unit. Note Do not touch the sponge roller of the transcription unit by your hand. 10 Re-install the image drum complete with toner cartridge, ensuring that the pegs (1 & 2) correctly locate into the slots on each side of the printer (3). Note Check that there is no paper remaining inside the machine. Remove the paper carefully so that it does not tear. If the paper tears, be sure to remove all of the pieces. 7 When you return the transcription unit into the printer, insert both projections (A) of the front end of transcription unit into holders of the printer. Note Check that there is no paper remaining inside the machine. Remove the paper carefully so that it does not tear. If the paper tears, be sure to remove all of the pieces. 11 Close the top cover. 12 Close the scanner unit. - 136 -