Oki MB471 Users Manual Basic - Page 36
Configuring the Tray Settings, Registering Custom Sizes, SETTING, Paper Setup, Paper Size, Media Type
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Loading Paper and Documents Configuring the Tray Settings After you load paper in tray 1, tray 2 (optional), or the MP tray, you need to register the loaded paper on your machine. With Tray 1/Tray 2: The paper size selection screen will be displayed automatically when you pull out the Tray. Please use settings from Section 4. With MP Tray: Please use settings from Section 1. 1 Press the key on the operator panel. 2 Press the to select [Paper Setup] and then press . OK 3 Press the to select the paper tray in which you loaded paper and then press . OK 4 Select [Paper Size] and then press . OK 5 Press the to select the size of the loaded paper and then press . OK Reference If [Custom] is selected for [Paper Size], you need to register the custom size. For how to register the custom size, refer to "Registering Custom Sizes" P. 36. 6 Press the to select [Media Type] and then press . OK 7 Press the to select the type of media loaded and then press . OK 8 Press the to select [Media Weight] and then press . OK 9 Press the to select the weight of the loaded paper and then press . OK 10 Press the until the top screen is displayed. Registering Custom Sizes To load custom size paper, you need to register the width and length of the paper before printing. The range of the sizes you can set differs according to the paper tray. Tray Available size range Tray1 Tray2 (Optional) (MB461, MB461+LP, MB471, MB471w, MB491, MB491+/ MB491+LP, ES4161 MFP, ES4191 MFP, MPS4200mb, MPS4700mb only) MP tray (MB451/ MB451w/ MB471/ MB471w/ MB491/ MB491+/ MB491+LP/ ES4191 MFP/ MPS4200mb/ MPS4700mb) Manual Feeder (MB441/ MB461/ MB461+LP/ ES4161 MFP) Width: 100 to 216 mm (3.94 to 8.5 inches) Length: 148 to 355.6 mm (5.83 to 14.0 inches) Width: 148 to 216 mm (5.83 to 8.5 inches) Length: 210 to 355.6 mm (8.27 to 14.0 inches) Width: 86 to 216 mm (3.4 to 8.5 inches) Length: 140 to 1320.8 mm (5.5 to 52.0 inches) Note For tray 1 and tray 2, you can configure the [Custom] setting only when [Paper Size] is set to [Custom]. The available size range for duplex printing is the same as that for tray 2. 1 Press the key on the operator panel. 2 Press the to select [Paper Setup] and press . OK - 36 -