Oki MB471 Users Manual Basic - Page 144
Please change SD Memory Card., Lamp Error. Please call service.
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Error Messages Error code Message Power OFF/ON %ERRCODE%: Error %FATALSTRING1% Document Jam Please open the scanner unit and the ADF cover. Please see Help for details. Lamp Error. Please call service. Please see Help for details. %TRAY% missing. Please see Help for details. 430 Please close %TRAY%.: 430,440 440 To cancel, select [Cancel] Inspection is required. %ERRCODE%: SIP Error Please call service. Scanner unit failed to detect printer unit. SIP Firmware Missing Wait a moment. Network initializing ... 085 Please change SD Memory Card. Error Code: 085 Power OFF/ON Carriage Error Please see Help for details. Power OFF/ON Carriage Error 581 Please close faceup stacker. 581:Cannot print with duplex. 500 Please install paper on Manual Feeder. Please set paper (%MEDIA_SIZE%). To cancel, select [Cancel] key Cause/Remedy Blinks Blinks An error has occurred in the device. Turn the machine off and then on again. If the same error occurs, turn the machine off and then on again. If the error is not resolved, or the same error occurs again, contact your dealer. A document jam has occurred. Open the ADF cover, and then remove the jammed paper. Blinks Indicates that a lamp error has occurred. This message is displayed because of the light intensity of the lamp is weak. Contact your dealer. Lights up A paper cassette is not in the indicated tray. Insert the paper cassette into the indicated tray. If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it. Blinks A paper cassette is not in the indicated tray. Insert the paper cassette into the indicated tray. If the cassette is already inserted in the machine, pull out the cassette and set it again to correctly locate it. Blinks Processing of scanned image has failed. Turn the machine off and then on again. If the error is not resolved, contact your dealer. Blinks An error has occurred between the scanner and printer units. Turn the machine off and then on again. If the error is not resolved, contact your dealer. Blinks A board failure has been detected. Turn the machine off and then on again. If the error is not resolved, contact your dealer. Lights up Changed network settings are being stored. Lights up The contents of the SD memory card cannot be read normally. If the same card is used further, the same error may occur. Replace the SD memory card. Blinks Indicates that a carriage error has ocurred. This message is displayed because of the scanner carriage is not working normally. If the error is not resolved, contact your dealer. Blinks Indicates that the following carriage error has occurred. 2 : Home position error (carriage connection error) 3 : Scanning start position detection error If the error is not resolved, contact your dealer. Blinks Although Duplex printing was attempted, the FaceUp stacker is open and Duplex printing is disabled. Blinks Manual paper feed is required. Manually insert the paper shown by %MEDIA_SIZE%. - 144 -