Oki MB471 Users Manual Basic - Page 20

Installing Your Machine Turning On Your Machine 1 Plug the AC cable into the AC power socket of your machine. 1 Hold down the power switch for about a second. 2 Plug the AC cable into the electric socket. 3 Check that no documents are on the document glass or ADF, and the ADF cover is closed. 4 Hold down the power switch for about a second to turn on the power. The message [Shutdown in progress. Please wait. The machine turns off automatically.] appears in the operator panel, and power switch indicator blinks every 1 second. Then the machine turns off automatically and power switch indicator goes out. The copy standby screen is displayed after your machine enters ready status. Note  Turn the power off, and when turning the power back on again, push the power switch after waiting for a few seconds. Turning Off Your Machine Be sure to follow the procedure below every time you turn off the machine. Note  Turn the power off, and when turning the power back on again, push the power switch after waiting for a few seconds.  When the machine is not used for long time When the machine is not used for long time due to holidays or trips, pull the power cord from the socket. Memo  The machine does not have functional failures if removing the power plug for long time (more than 4 weeks). Power Save Mode and Sleep Mode The two-phase power saving mode enables you to reduce machine power consumption.  Power Save Mode When your machine is not used for a certain period of time, it automatically enters a power saving mode to reduce power consumption. You can enter the power saving mode manually by pressing the key on the operator panel. - 20 -