Oki MB471 Users Manual Basic - Page 49

Setup Memo  If [Timeout] is displayed, it is possible that the wireless AP of the connection destination could not be found within the time limit. After entering the PIN code from this equipment into the wireless AP and starting WPS-PIN, select [Yes] in step 7 again within 2 minutes.  Configuring wireless network selection 1 Log in as the administrator. 2 Press the to select [Network Menu], and then press the . Connecting to a Computer 8 Enter the security password of the selected access point. (1) With WEP 1 a) [Enter the WEP key] will be displayed. Enter the encryption key using the keys, and press . OK 3 Press the to select [Network Setup], and then press the . 4 Press the to select [Wireless Setting], and then press the . Go to Section 9 (2) With WPA-PSK or WPA2-PSK a) [Enter the Pre-shared key] will be displayed. Enter the encryption key using the keys, and press . OK 5 Press the to select [Wireless Network Selection], and then press the . Go to Section 9 (3) With WPA-EAP or WPA2-EAP a) Configure settings from Web Page. 6 The product starts to search the wireless access point. 7 A list of access points found by the search will be displayed. Select the access point you wish to connect to using the keys, then press . OK (4) With Disable a) The password input screen will not be displayed. Go to Section 9. 9 In the confirmation screen, please check the contents on the confirmation screen, select [Yes], and press . OK - 49 -