Oki MB471 Users Manual Basic - Page 172
Replacing Toner Cartridges, Procedure for Replacement
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Replacing Consumable Items Replacing Toner Cartridges Model Type MB461/ Starter toner cartridge MB461+LP/ Toner cartridge MB471/ MB471w/ ES4161 Toner cartridge (Medium) MFP MB491/ Starter toner cartridge MB491+/ Toner cartridge MB491+LP/ ES4191 MFP Toner cartridge (Medium) Toner cartridge (Large) MB441/ MB451/ MB451w Starter toner cartridge Toner cartridge Toner cartridge (Small) MPS4200mb/ Toner cartridge (Large) MPS4700mb Note A toner selling is different by an area. Procedure for Replacement 1 Open the top cover and remove the used toner cartridge. WARNING Be sure not to throw used toner cartridges into fire; toner in the cartridges may scatter and ignite, causing burn injuries. Memo When disposing of used toner cartridges by necessity, poly-bag them, and be sure to follow instructions and regulations of your local government. Toner cartridge Tape Unpack the new toner cartridge. Hold the toner cartridge and gently shake it several times. Place the toner cartridge horizontally and partially remove the tape from it. Hold the toner cartridge with the tape face down and the blue lever on the right side. Protrusion of image drum Insert the toner cartridge, while matching its left side with the protrusion on the left side of the image drum. lever Toner cartridge lever Rotate the blue lever of the toner cartridge in the direction of the arrow of on the toner cartridge until it stops. Remove the toner cartridge. 2 Install a new toner cartridge. Firmly press the grooves on the right side of the toner cartridge against the protrusion of the cartridge guide on the right side of the image drum. While holding down the toner cartridge top with your hand to prevent it from rising, rotate the blue release lever on the right side in the direction of the arrow of on the toner cartridge until it stops. Note When the toner cartridge is not fully fixed, a decline in print quality may occur. 3 Lightly wipe the whole LED head with a soft cloth or soft tissue paper. - 172 -