Oki MB471 Users Manual Basic - Page 29

Loading Paper and Documents  Loading Paper and Documents This section explains the specifications for paper and documents, and how to load them. 1 Setup Paper Supported Paper Types For high-quality printing and to avoid printing problems, be sure to use the supported paper types. Please use digital photo print paper. Please check the print quality and the movement of the paper thoroughly beforehand to make sure that there are no problems. Your machine supports the below-listed types of paper. Using paper other than the recommended print paper may result in unstable paper output depending on how the front/back of the paper is loaded. In this case, check beforehand by inserting the paper in the reverse orientation etc, and confirm that the paper is output correctly before use. Paper Type Paper Size mm (inch) Paper Weight Standard paper A4 A5 A6 B5 Letter Legal (13 inch) Legal (13.5 inch) Legal (14 inch) Executive Statement 16K (184 x 260 mm) 16K (195 x 270 mm) 16K (197 x 273 mm) Custom *1*2*3 210 x 297 148 x 210 105 x 148 182 x 257 215.9 x 279.4 (8.5 x 11) 215.9 x 330.2 (8.5 x 13) 215.9 x 342.9 (8.5 x 13.5) 215.9 x 355.6 (8.5 x 14) 184.2 x 266.7 (7.25 x 10.5) 139.7 x 215.9 (5.5 x 8.5) 184 x 260 195 x 270 197 x 273 Width: 64~216 Length: 148~1321 60 to 163 g/m2 (16 to 43lb) For duplex print, 60 to 163 g/m2 (16 to 43lb) Note  If the paper size is set at A6, A5, or with a paper width narrower than 148 mm (A5 width), the printing will be slower. 60 to 163 g/m2 (16 to 43lb) *1 Tray 1 can contain paper 100 to 216 mm (3.94 to 8.5 inches) wide and 148 to 355.6 mm (5.83 to 14 inches) long. *2 Tray 2 can contain paper 148 to 216 mm (5.83 to 8.5 inches) wide and 210 to 355.6 mm (8.27 to 14 inches) long. *3 The MP Tray (MB451/MB451w/MB471/MB471w/MB491/MB491+/MB491+LP/ES4191 MFP/ MPS4200mb/MPS4700mb) or Manual Feeder (MB441/MB461/MB461+LP/ES4161 MFP) can contain paper 86 to 216 mm (3.4 to 8.5 inches) wide and 140 to 1320.8 mm (5.5 to 52 inches) long. - 29 -