Oki MB471 Users Manual Basic - Page 17
Installing Your Machine
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setup Installing Your Machine Installing Your Machine This section explains how to unpack your machine and how to turn it on and off. 1 Unpacking Your Machine Note The image drum (the green tube) is very delicate. Handle it carefully. Do not expose the image drum to direct sunlight or very bright interior light (approximately more than 1500lux). Even under the normal interior light, do not leave it for more than 5 minutes. Packaging and cushioning material is required at the time of shipping the machine. Please keep it as you will need it should you wish to transport the machine at some point in the future. 1 Remove your machine from the box and remove cushioning materials and the plastic bag from your machine. The accessories are packed within the cushioning material (1). 3 Remove the protection tapes (2) at the top and sides of your machine to take out cushioning materials (3). 3 2 1 4 Remove the protection tapes (4) to open the MP tray. 2 Lift your machine and place it where it is 4 to be installed. Note Do not open the scanner unit till procedure no.9 is completed. 5 Remove the protection tape (5) to pull the paper up. 5 6 Close the MP tray. - 17 -