Oki MB471 Users Manual Basic - Page 43
Settings for each dialing type, Connecting PBX, Home Telephone or, Business Phone
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setup Basic Settings for Faxing (for MB451, MB451w, MB471, MB471w, MB491, MB491+, MB491+LP, ES4191 MFP, MPS4200mb, MPS4700mb only) Connecting PBX, Home Telephone or Business Phone Plug the [Telephone cable] connected to the [Public Line (Analog)] into the [LINE connection] of your machine. Remove the telephone connector cover. Plug the telephone cable connected to a control device including PBX, etc. into the [TEL connection] of your machine. LINE connection TEL connection Connecting as an Internal Telephone Plug the [Telephone cable] connected to a 1 control device including PBX, etc. into the [LINE connection] of your machine. LINE connection Public Line (Analog) Control device including PBX, etc. Control device including PBX, etc. Telephone cable Telephone cable Public Line (Analog) - Home Telephone A number of telephones are connected with one or two telephone lines to allow internal and door phone communication. This is simple switching equipment for household. - Business Phone More than two telephone lines can be accommodated, and these telephone lines can be shared with a number of telephones to allow internal communication. This is simple switching equipment. Memo Set [PBX Line] to [ON]. Refer to "PBX Connecting" P. 45. Settings for each dialing type The factory default [MF (Tone)/DP (Pulse)] is set to [Tone]. For push-button phones, if you hear a "Beep, boop, beep" sound, leave [MF (Tone)/DP (Pulse)] as [Tone]. For push-button type phones, if you do not hear a "Beep, boop, beep" sound, or if you are using a rotary-dial type phone, set [MF (Tone)/DP (Pulse)] to [Pulse]. How to Configure Settings 1 Press the key on the operator panel. 2 Press the to select [Admin Setup], and press . OK 3 Enter the administrator password. The factory default password is "aaaaaa". 4 Select [Enter], and press . OK 5 Press the to select [User Install], and press . OK 6 Press , select [MF (Tone)/DP (Pulse)], and then press . OK 7 Press , select Dial Type, and then press . OK - 43 -