Xerox 6180N Using LCDS Print Description Language - Page 114
On the FreeFlow Print Server LCDS system, the maximum
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Specifying input parameters • When the system is operating online in 3211 or 4245 emulation mode, forms control buffers (FCBs) are received from the host to redefine channel-to-line number assignments and to set margins based on the print position indexing byte. • If the print position indexing (PPI) byte of the FCB is enabled, it is not suppressed by FCB=IGNORE. If an FCB with a PPI byte is received, indexing is invoked; if an FCB without a PPI byte is received, indexing is turned off (even if FCB=IGNORE). CAUTION Use of the PPI byte to shift the starting print position may cause problems in recognition of both DJDEs and banner pages. • On the FreeFlow Print Server LCDS system, the maximum record length is 12288 bytes. This limit is not influenced by print position indexing. However, on other LPS systems, you should not use PPI for print record lengths from 151 bytes to 214 bytes. Example of an online JSL The following figure shows an example of an online JSL that contains several input processing commands. This JSL would be used only for printing a job sent from a host over a channel or through a TCP/IP gateway. Table 2-2. Example of an online JSL ONLINE: JDL; VFU1: VFU ASSIGN=(1,4), ASSIGN=(2,10), ASSIGN=(3,16), ASSIGN=(4,22), ASSIGN=(5,28), ASSIGN=(6,34), ASSIGN=(7,40), ASSIGN=(8,46), ASSIGN=(9,66), ASSIGN=(10,52), ASSIGN=(11,58), ASSIGN=(12,64), TOF=1, BOF=66; /*Tables and criteria */ T1: TABLE MASK='?', CONSTANT='HE?DE? PAGE'; C1: CRITERIA CONSTANT=(1,11,EQ,T1), LINENUM=(1,10); T2: TABLE CONSTANT='TRAILER PAGE'; C2: CRITERIA CONSTANT=(0,12,EQ,T2), LINENUM=(1,10); 2-6 Using LCDS Print Description Language