Xerox 6180N Using LCDS Print Description Language - Page 230

Using logical processing Options Table 3-37. RSUSPEND and RRESUME BEGIN parameter options and definitions Option Definition CURRENT Specifies that printing will stop or resume on the current record. • If CURRENT is coded for RSUSPEND, the record satisfying testexp does not print. • If CURRENT is coded for RRESUME, the record is printed. NEXT Specifies that printing will stop or resume with the next record. • If NEXT is coded for RSUSPEND, the record satisfying testexp is printed, and printing is suppressed beginning with the next record. • If NEXT is coded for RRESUME, the record satisfying the testexp is not printed, and printing begins with the next record. Default NEXT RSUSPEND and RRESUME TEST Defines the test expressions for the record at which printing will be suppressed (RSUSPEND) or resumed (RRESUME). Syntax RSUSPEND TEST = testexp RRESUME TEST = testexp Options Table 3-38. RSUSPEND and RRESUME TEST parameter options and definitions Options Definitions testexp test expression. Defines a test expression for the record with which printing will be suspended (RSUSPEND) or resumed (RRESUME) following print suppression. Refer to "Coding a test expression" earlier in this chapter for the format and syntax of a testexp. Default No default RRESUME and RSUSPEND commands: points to note • On the FreeFlow Print Server LCDS system, RSUSPEND and RRESUME are supported only for offline printing. 3-50 Using LCDS Print Description Language