Xerox 6180N Using LCDS Print Description Language - Page 366

Using Dynamic Job Descriptor Entries (DJDEs) Table 5-4. Page oriented DJDEs (Continued) DJDE Function ITEXT JDE JDL MAP MARGIN Specifies a text message that will be displayed to operators during processing. Specifies the JDE to be used within the selected JDL at the next page boundary. Specifies the name of the JDL to be invoked at the next page boundary. References a previously created font mapping file. Specifies the left printing margin within each logical page. MODIFY NUMBER OTEXT PALETTE PMODE RFORM Specifies the CME to be used on each subsequent logical page. Specifies page numbering control. Provides a text message to be displayed to the operator during job printing. Specifies the palette of inks that will be used for subsequent pages. Specifies the printing mode for each page (either landscape or portrait). Specifies whether a form is printed on all RTEXT pages. RTEXT Specifies text to be printed on a separate page preceding each report copy. SEFMAP Specifies a font mapping table. SHIFT Specifies a shift of page image (page content) for binding purposes. SF1FUNCTION Specifies sheet finisher function number 1 through the DFA channel C6. SF2FUNCTION Specifies sheet finisher function number 2 through the DFA channel C7. SIDE STOCKS TMODE TRANS XSHIFT Specifies the repositioning of the next logical page to the first logical page position of the given side of a physical sheet of paper. Redefines the parameters of a STOCKSET command (the types of stocks to use) for the page. Specifies process direction measurement for determining default pitch modes. NOTE: This feature is not supported by the Nuvera MX series printers. Specifies whether transparencies are used in the print job. Allows shifting in the x direction for short edge binding. 5-12 Using LCDS Print Description Language