Xerox 6180N Using LCDS Print Description Language - Page 270
Options, Default, LINE INKINDEX, Syntax, Table 4-31. LINE GDATA parameter options and definitions,
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Specifying print format parameters Options Table 4-31. LINE GDATA parameter options and definitions Option Definition offset The starting point of the graphic data. termination The terminating byte of the record. The options are: • DEFAULT - If online, a single terminating byte exists. - If offline, no terminating byte exists. • n: The number of terminating bytes that exist Default offset: 0 termination: DEFAULT LINE INKINDEX Specifies a field within a data record that contains a number that represents the ink index in the current ILIST. Syntax LINE INKINDEX = {offset | (offset [, initval [, bitopt]]) | NONE} Options Table 4-32. LINE INKINDEX parameter options and definitions Option offset initval bitopt NONE Definition Indicates the byte offset in the data record where the ink index number is located. initial value. Specifies an index value that is associated with the first ink in the ink list. Must be ONE or ZERO. • "ZERO" specifies that the first ink on the ink list is considered "ink 0." • "ONE" indicates that the first ink on the ink list is considered "ink 1." The default initval is ONE. bit option Specifies the number of bits that should be used in calculating the ink index. The range is 1 through 7. The default bitopt value is 4. Specifies that there is no ink index. Default NONE 4-30 Using LCDS Print Description Language