Xerox 6180N Using LCDS Print Description Language - Page 377

Using Dynamic Job Descriptor Entries (DJDEs) COPIES DJDE: points to note • In duplex processing, if COPIES appears before the back side of a duplex page, a blank back sheet is output, and the print data continues on the next front page. • If COPIES=0 is specified for a page, that page is not printed. • If number is set to zero, this copy count remains in effect until a new copy count or End Of Report is encountered. DJDEs encountered while number is set to zero are processed normally. • The number of copies specified in the DJDE overrides the number of copies in the OUTPUT command. DATA DJDE Specifies the location and length of printable data within an input record. Type Record oriented Syntax DATA = (pdo, length) Options Table 5-17. DATA DJDE options and definitions Option Definition pdo Print data offset. Number of bytes between the start of the user portion of the record and the first character of the record to be printed. length Specifies the maximum length of printable data within each logical record. DATA DJDE: point to note The DATA DJDE takes effect at the next record following an END DJDE. Using LCDS Print Description Language 5-23