Xerox 6180N Using LCDS Print Description Language - Page 280

Specifying print format parameters MESSAGE command parameters The following table summarizes the MESSAGE command parameters. Table 4-39. Summary of MESSAGE command parameters Parameter Specifies MESSAGE ITEXT Specifies that a message to the operator will be displayed during input processing. MESSAGE OTEXT Specifies that a message to the operator will be displayed during printing. Online Offline DJDE Y Y Y Y Y Y The following sections describe the syntax of the command parameters and explain the parameter options. MESSAGE ITEXT ("Input text") Specifies a text message to be sent to the operator during input processing. Syntax MESSAGE ITEXT = {(sc [, passnum]) | NONE | WAIT} Options Table 4-40. MESSAGE ITEXT parameter options and definitions Option Definition NONE Specifies that no text message is sent to the operator during input processing. passnum pass number Specifies the pass (copy ply) to which the message text applies. The message is sent to the operator just before processing of the indicated pass is begun. If no pass number is specified, the indicated message is sent at the beginning of the first pass. sc string constant Specifies a text message (string constant) of up to 80 characters. WAIT Specifies that after the text is displayed, input is suspended until the operator has initiated a Continue request. NOTE: The FreeFlow Print Server LCDS systems do not support the ITEXT WAIT parameter. It is ignored, and no error message is displayed. Default NONE 4-40 Using LCDS Print Description Language