Xerox 6180N Using LCDS Print Description Language - Page 453

B. PDL command quick reference This section provides a quick reference for PDL commands, in the form of structure diagrams. The commands shown here are supported on some or all of the following laser printing systems: DP180 LPS, DP96 LPS, 4050 LPS, 4090 LPS, 4135 LPS, 4635 LPS, 4850 LPS, 4890 LPS, DP92C LPS, 8790 LPS, 9790 LPS, and DP 2000 Series EPS. Refer to Appendix A, "PDL command and DJDE summary," for information on which printing systems support each command and parameter. Conventions Symbols used in the command syntax are listed in the table below. Table B-1. Symbols used in command syntax Symbol Meaning ac Alpha character identifier. Signifies a command identifier. Consists of 1 to 6 alphanumeric characters (A through Z and 0 through 9). One of the characters must be alpha. dd Signifies a command identifier. Same as ac except there is no restriction of having an alpha character. This identifier applies only to SYSTEM (or JDL) and JOB (or JDE) command sets. id Identifier. Reference to a command identified by an ac command identifier. sc String constant. A hexadecimal, octal, ASCII, EBCDIC, or character text string constant. value A decimal constant. s The s at the end of some PDL commands and DJDEs is optional. Contents of Quick Reference table columns The Quick Reference table for PDL commands shows, in compact table format, the syntax for each parameter of each PDL command. The table columns contain the following information: • Command column: Lists the PDL commands in alphabetical order. Using LCDS Print Description Language B-1