Xerox 6180N Using LCDS Print Description Language - Page 265

Specifying print format parameters Options Table 4-25. LINE BASELINE parameter options and definitions Option Definition TOP Determines the baseline position from the top of each line by using the BASELINE parameter of the first font in the PDE font list. CENTER Positions all of the characters so that their center lines match. BOTTOM Determines the baseline from the bottom of each line by using the BASELINE parameter of the first font in the PDE font list. LARGE[ST] Determines the baseline position and the line spacing by using the largest font in the PDE font list. Default LARGE[ST] LINE BASELINE parameter: point to note If KANJI is specified as one of the fonts (KANJI = YES), a BASELINE=LARGE command is treated as BASELINE=TOP. LINE BLANKTYPE Specifies whether or not the "shift in" and "shift out" function codes are printed as spaces. Syntax LINE BLANKTYPE = {F | V | SPACE | NOSPACE} Options Table 4-26. LINE BLANKTYPE parameter options and definitions Option Definition F Specifies the width of the back space character that is associated with the width of the full-sized single-byte character, or of the half-sized double-byte character. V Specifies the width of the back space character that is associated with the full- sized single-byte or double-byte character. SPACE Replaces X'0E' and X'0F' ("shift-in" and "shift-out") function codes with singlebyte blank character spaces. NOSPACE Specifies that no space code is substituted. Default NOSPACE Using LCDS Print Description Language 4-25