Xerox 6180N Using LCDS Print Description Language - Page 242

Specifying print format parameters ABNORMAL command The ABNORMAL command allows you to restrict certain operator functions and to define system responses to error conditions. ABNORMAL command parameters The following table summarizes the ABNORMAL command parameters. Table 4-2. Summary of ABNORMAL command parameters Parameter Specifies Online Offline DJDE ABNORMAL ACCTFEED Specifies the stock from which an error sheet N Y N will be fed when an error occurs during the accounting report processing. ABNORMAL CODE Specifies how illegal function codes in the N Y N data stream will be handled. ABNORMAL ERROR Specifies the system response to abnormal Y Y N conditions detected while processing DJDEs. ABNORMAL IMISMATCH Specifies action to take when the job contains Y Y N a specification for an ink that is not loaded in the printer. Options are ABORT, STOP, and CONTINUE. ABNORMAL ISUBSTITUTE Specifies whether or not an ink substitution Y Y N can be made by the operator. Options are NONE and ANY. ABNORMAL OTEXT Specifies that a message will be displayed to Y Y N the operator when printing stops because of a system rollover. ABNORMAL REP Generates a page offset and/or slip sheet Y Y N after recovery from a rollover. ABNORMAL SECURITY Enables restriction on use of certain operator Y Y N commands. The following sections describe the syntax of the ABNORMAL command parameters and explain the parameter options. ABNORMAL ACCTFEED Specifies the stock from which an error sheet will feed when an error occurs during accounting report processing. 4-2 Using LCDS Print Description Language