Xerox 6180N Using LCDS Print Description Language - Page 140
Specifying input parameters, Using LCDS Print Description Language, PCC ASSIGN, TOF | OVR, No
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Specifying input parameters Syntax [ac:] PCC ASSIGN = {(byte, ccln) | (byte, (ccln1 [, ccln2] [, ...])} Syntax for ccln definition: {field1[, field2 [, field3]] | (field1 [, field2 [, field3]] [, {TOF | OVR | IGN}])} Options Table 2-33. PCC ASSIGN parameter options and definitions Option Definition byte ccln The printer carriage control byte that is being defined. Its value is in the range 0 to 255 (X00 to XFF). carriage control line number. Specifies the action that should be taken when the printer carriage control byte defined in the byte field is encountered. A ccln consists of the following: • Space print parameters This has the following components: - field1 Specifies the carriage action to take before printing. (An example is the ANSI carriage control.) - SPm Space m lines before printing. - SKn Skip to channel n before printing. - field2 Specifies whether printing occurs for this record: - P Print the output data at the line number computed after field1 is processed. - N No printing occurs for this record (default). - field3 Specifies the carriage action to take after printing. (An example is the IBM1403 carriage control). - SPm Space m lines after printing. - SKn Skip to channel n after printing. NOTE: Each of the three fields shown above is optional; however, you must specify at least one field. The range for variables m and n is 0 to 15. • Bottom Of Form actions (optional) - TOF When spacing causes bottom of form (BOF) to occur, instructs the system to go to the top of form (TOF) on the next page and to stop spacing. - IGN When spacing causes the bottom of form (BOF) to occur, instructs the system to ignore it to continue spacing through the end of the physical page. The page then transitions to top of form and spacing continues. - OVR (default) When spacing causes bottom of form (BOF) to occur, instructs the system to go to the top of form (TOF) on the next page and to continue spacing. Default No default 2-32 Using LCDS Print Description Language