Xerox 6180N Using LCDS Print Description Language - Page 337
The FreeFlow Print Server LCDS systems support
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
Specifying print format parameters • RTEXT is imaged on a separate physical sheet. The line and column specifications for positioning the text refer to the first logical page specified in the PDE. • RAUX criteria that is found on any logical page on the physical page causes that sheet to be fed from the tray containing the stock identified as the AUX stock. • Accounting statistics are accumulated on the basis of physical pages. • If any logical page overflows the physical page before BOF is encountered, the next line moves to the first logical page of the next side, and all subsequent logical pages are repositioned based on BEGIN values. • With the exception of DEPT and SHIFT, all page oriented DJDEs take effect at a logical page boundary. • When the following DJDEs are applied, the current page position moves to the first logical page on the front side of a new physical sheet: - BFORM - COPIES - DUPLEX - JDE - JDL - OTEXT - RTEXT • The following DJDEs cause the current page position to go to the first logical page on the next physical side of the sheet: - FORMAT - FORMS • If no BEGIN parameter is specified, the default PDE FMT1 (one logical page per physical page) is used. • The FreeFlow Print Server LCDS systems support the specification of horizontal position values with up to four decimal places; the other Xerox LPS systems support a maximum of only three places. Using LCDS Print Description Language 4-97