Xerox 6180N Using LCDS Print Description Language - Page 262

Specifying print format parameters IDR ILIST This parameter provides a list of all the inks which may be referenced by indexing in printing variable input data or CME data. Syntax ac:IDR ILIST = {'inkname' | ('inkname1' ['inkname2'] [, ...])} Options Table 4-22. IDR ILIST parameter options and definitions Option Definition 'inkname' Name of an ink that may be referenced by ink indexing during printing. Can be a solid primary color only. Default No default IDR ILIST parameter: points to note • The first ink in the ILIST parameter is the default unless it is overridden by an IDFAULT parameter. • The maximum number of ink names that may be specified in the ILIST parameter is 64. • If an IDR parameter is not specified in the OUTPUT command or if the IDR that is specified does not exist, the system supplies DFIDR.IDR as the system default IDR. DFIDR.IDR is a standard file that is provided with the system software. It contains the definition of the system default 'BLACK' ink, specified by the following command: DFIDR: IDR ILIST = 'BLACK'; • When the VOLUME command CODE=NONE parameter is specified, an ILIST parameter referencing a highlight color primary causes the entire report to print in highlight mode. If ILIST references only black ink, the report prints in black mode. 4-22 Using LCDS Print Description Language