Xerox 6180N Using LCDS Print Description Language - Page 276

Specifying print format parameters LINE PCCTYPE parameter: points to note • For the FreeFlow Print Server LCDS systems, this parameter is treated as if the system were an IBM 3211. Note that there is no functional difference between IBM3211 and IBM4245 for PCC types. • Creation of a user defined PCC table, which may be referenced by either an identifier id or the keyword USER, is specified using the PCC command. Refer to "PCC command" section of the "Specifying input parameters" chapter. • The INITIAL parameter for any of the PCCTYPEs listed in the previous table (except ANSI or HOST=RSX11) is TOF. For ANSI or HOST=RSX11, the INITIAL parameter is BOF. For USER or PCCid, the INITIAL parameter is set by the user in the PCC command. • The PCCTYPE=IBM3211 or IBM4245 specifies that the printer online interface will perform checks, such as for bad or NO OP parameters. LINE VFU Specifies a vertical format unit (VFU) table. Syntax LINE VFU = {vfuid | NONE} Options Table 4-38. LINE VFU parameter options and definitions Option vfuid NONE Definition vertical format unit identifier. The command identifier of the VFU table, which must precede this reference to it. The VFU table defines print line positions corresponding to skip to channel parameters for the job to be processed. Indicates that any skip to channel parameter is to be replaced by a carriage control of Print and Space 1. Default NONE 4-36 Using LCDS Print Description Language