Xerox 6180N Using LCDS Print Description Language - Page 293

Specifying print format parameters Options Table 4-50. OUTPUT DESTINATION parameter options and definitions Option Definition BIN Specifies that the currently selected bin is used. TRAY Sends output to the sample tray. Transparencies should always be sent to this tray. NOTE: Use caution when selecting the TRAY option because of the limited capacity of the sample tray (100 sheets). EXPORT Specifies that sheets be sent to the bypass transport to be fed into a finishing device. The EXPORT option takes effect only if: • The user interface Output window has "System Specified" selected in the Output Location field, and • The Finishing field displays the name of a finishing device. Default BIN OUTPUT DUPLEX Specifies whether printing is to occur in duplex (print on both sides of a sheet) or simplex (print on a single side). Syntax OUTPUT DUPLEX = {YES | NO} Options Table 4-51. OUTPUT DUPLEX parameter options and definitions Option YES NO Definition Specifies two sided (duplex) printing. Specifies single sided (simplex) printing. Default NO OUTPUT DUPLEX parameter: point to note Transparencies cannot print in duplex. OUTPUT FACEUP Specifies that printed pages are delivered face up to the output destination. Syntax OUTPUT FACEUP = {YES | NO} Using LCDS Print Description Language 4-53