Xerox 6180N Using LCDS Print Description Language - Page 379

Using Dynamic Job Descriptor Entries (DJDEs) Options Table 5-19. DESTINATION DJDE options and definitions Option Definition BIN Specifies delivery to the currently active output bin. TRAY Specifies delivery to the sample tray. NOTE: Use caution when selecting the sample tray because of its limited capacity. EXPORT Specifies that sheets will be sent to the bypass transport. DESTINATION DJDE: points to note • Transparencies should be sent only to the sample tray. • EXPORT is honored only if the bypass transport is specified on the LCDS Setup window as the output destination. DUPLEX DJDE Specifies whether printing is to occur on both sides of a page (duplex mode) or a single side (simplex mode). The choice takes effect on the next page boundary. Type Page oriented Syntax DUPLEX = {YES | NO} Options Table 5-20. DUPLEX DJDE options and definitions Option Definition YES Specifies that printing will occur on both sides of a sheet. (This is also called "two-sided printing.") NO Specifies that printing will occur on only the front side of the sheet. (This is also called "one-sided printing." Using LCDS Print Description Language 5-25