Xerox 6180N Using LCDS Print Description Language - Page 297

Specifying print format parameters OUTPUT FORMS parameter: points to note • CYCLEFORMS and FORMS parameters: Both may be used within a report; however, only the last parameter specified is in effect at any given time. If a multicopy report specifies CYCLEFORMS, a FORMS DJDE that is encountered within the report overrides the CYCLEFORMS parameter from that point in every copy. • You can code forms at a workstation with forms creation software such as Elixir, on another laser printing system using Xerox Forms Description Language (FDL), or on a mainframe computer. You can transfer these form files from tape, CD, or diskette to the print server disk by using the Import process. (For further information, click the online [Help] button on your system print server and refer to "Importing resources.") You can also download forms from a host computer by using File Transfer Protocol (FTP) or the FILE DJDE. OUTPUT FORMS parameter example The example below shows how to specify forms on different copies. Form FORM12 appears on copies 1 and 2. FORM3 will print on copy 3, and FORM4, on copies 4 through 10. OUTPUT FORMS = (FORM12,1,2), FORMS = FORM3, FORMS = FORM4, COPIES = 10; OUTPUT GRAPHICS Specifies how graphics will be processed in a job. Syntax OUTPUT GRAPHICS = {NO | YES | MOVE | BATCH | ({NO | YES | MOVE}, NOSUB)} Options Table 4-56. OUTPUT GRAPHICS parameter options and definitions Option NO YES BATCH Definition Indicates that there are no graphics in this job. Indicates there are graphics in the job, and they are processed in Batch mode. Means that the input stream contains no text, but only graphics that are to be imaged, one per page. Using LCDS Print Description Language 4-57