Xerox 6180N Using LCDS Print Description Language - Page 372
Options, BEGIN DJDE: points to note, BFORM DJDE, Syntax, Table 5-10. BEGIN DJDE options
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
Using Dynamic Job Descriptor Entries (DJDEs) Options Table 5-10. BEGIN DJDE options and definitions Option Definition vpos Specifies the vertical position of the first character of the first print line on the logical page. hpos Specifies the horizontal position of the first character of the first print line on the logical page. units Unit measure for the horizontal and vertical positions. It may be specified in inches (IN), centimeters (CM), or DOTS. The default is IN. BEGIN DJDE: points to note • All specifications for vpos and hpos are rounded to the nearest dot (1/300 of an inch) for positioning of the logical page. Specifications must be a decimal number with no more than three digits to the right of the decimal point; for example, 0.563 IN or 2.35 CM. • In specifying the location of the beginning of a print line on the logical page, you measure while viewing the page in the orientation (landscape or portrait) in which it will be printed. • You may have more than one logical page per physical page. Use multiple BEGIN DJDEs to define multiple logical pages. BFORM DJDE Specifies that a form will be printed on the back side of a page (must have DUPLEX=YES). It takes effect at the next front-toback-side page transition encountered. BFORM DJDEs are the same as for the OUTPUT command. Type Page oriented Syntax BFORM= {NONE | (formid [, init [,copies]] [, (INKS, inkref1 [,inkref2] ...)])} 5-18 Using LCDS Print Description Language