Xerox 6180N Using LCDS Print Description Language - Page 415

Using Dynamic Job Descriptor Entries (DJDEs) PALETTE DJDE example PALETTE = 'SIMPLE' PMODE DJDE Specifies the text orientation for each page. Type Page oriented Syntax PMODE = {LANDSCAPE | PORTRAIT} Options Table 5-50. PMODE DJDE options and definitions Option Definition LANDSCAPE Indicates that print lines will be parallel to the long edge of the paper (for paper loaded with its short edge facing the feed direction). Print lines on 11 by 17 inch paper are parallel to the short edge. PORTRAIT Indicates that print lines will be parallel to the short edge of the paper (for paper loaded with its long edge facing the feed direction). Print lines on 11 by 17 inch paper are parallel to the long edge. PMODE DJDE: point to note If PMODE is changed through a DJDE, the BEGIN DJDE should be respecified (even if the same horizontal and vertical positions were specified in the previous BEGIN DJDE). RFORM DJDE Specifies a form to be printed with all RTEXT pages. It takes effect on the next RTEXT page. The options are the same as for the ROUTE RFORM command. Type Page oriented Syntax RFORM = {formid [, (INKS, inkref1 [, inkref2])] | NONE} Using LCDS Print Description Language 5-61