Xerox 6180N Using LCDS Print Description Language - Page 283

Specifying print format parameters OUTPUT command The OUTPUT command controls the organization and format of a report, including the number of copies of a report, the forms to be printed with the variable data, report offsetting, and the use of simplex or duplex mode. For further information on graphics features, refer to the "Using PDL commands for graphics" chapter. OUTPUT command parameters The following table summarizes the OUTPUT command parameters. Table 4-42. Summary of OUTPUT command parameters Parameter Specifies Online Offline DJDE OUTPUT BFORM OUTPUT BINDING OUTPUT COLLATE Prints a specified form only on the back sides Y of duplex pages. Specifies page rotation for printing for short Y edge or long edge binding. Specifies whether report pages will be collated Y or uncollated. Y Y N N Y Y OUTPUT COPIES Specifies the number of report copies that will Y be printed. OUTPUT COVER Feeds cover pages for a report from the tray Y that contains the AUX stock. OUTPUT CYCLEFORMS Associates forms with report pages in a Y repeating sequence. OUTPUT DENSITY Enables or disables image generator local Y density functionality. (Listed for compatibility purposes; not supported on FreeFlow Print Server LCDS systems.) OUTPUT DESTINATION Specifies the destination for printed output. Y OUTPUT DUPLEX Prints the job on both sides of the paper. Y OUTPUT FACEUP Delivers and stacks the printed sheets face up Y in the stacker. OUTPUT FEED Specifies the tray from which paper will feed Y for the job. OUTPUT FORMAT Specifies a page descriptor entry (PDE) for Y the job. OUTPUT FORMS Associates forms with report copies Y Y Y Y N Y N Y N Y Y Y Y Y N Y Y Y Y Y Y Using LCDS Print Description Language 4-43