Xerox 6180N Using LCDS Print Description Language - Page 119

Specifying input parameters As before, volume 1 is the start-of-job, and the volume specified by n is the volume that contains data for the last page that was written to the print file before the system rollover. Input processing command descriptions The basic PDL commands to control input processing are CODE, PCC, RECORD, SEFFNT, TCODE, and VOLUME, which are defined here. The "Using logical processing" section defines commands that specify logical functions that may be performed on either a record or page basis. The input related PDL commands are summarized in the following table. Table 2-3. Summary of PDL commands associated with input processing Command Function BLOCK command Describes input block characteristics CODE command Defines the input character code translation table. DBCODE command Defines an input double-byte character code translation table. IDEN command Indicates that the report contains DJDEs. KCODE command Defines an input double-byte character code translation table. PCC command Defines printer carriage control table. RECORD command Specifies the input data record characteristics. SEFFNT command Defines font mapping for short edge feed jobs. TCODE command Defines masked comparison type assignments for translation. VOLUME command Specifies input medium characteristics. Using LCDS Print Description Language 2-11