Xerox 6180N Using LCDS Print Description Language - Page 427

Using Dynamic Job Descriptor Entries (DJDEs) • When simplex mode is put into effect, as is done by use of the TRANS DJDE, the system ensures that the first simplex page printed after the DJDE is on an odd numbered page. To accomplish this, the system forces a blank back side for the last duplex page. However, if you specify TRANS=NO and DUPLEX=YES, the system ensures that the first duplex page is printed on an odd numbered page. XMP DJDE (Xerographic Mode Persistence) Controls the xerographic mode switching between black and color printing for a report. Type Record oriented Syntax XMP = {DEFAULT | REPORT} Options Table 5-63. XMP DJDE options and definitions Option Definition DEFAULT Specifies that the xerographic mode switching that was specified at installation will be used for the report. REPORT Specifies that when the system determines that a report requires highlight color for a page, all subsequent pages of the report will print in highlight color. Auto Switch to Monochrome: On the FreeFlow Print Serverbased DT 128/155/180 HighLight Color Printing Systems, the XMP feature is called Auto Switch to Monochrome and can be enabled and disabled in the System Preferences window under the Setup pull-down menu on the main GUI. When enabled, this feature will automatically switch the printer from Highlight Color Mode to Black Only Mode after a user-definable number of consecutive black-only pages. When enabled, it will also switch back to Highlight Color Mode from Black Only Mode when a scheduled highlight color page is to be printed. The default setting is Off. Using LCDS Print Description Language 5-73