Xerox 6180N Using LCDS Print Description Language - Page 138
KCODE command: point to note, PCC command, PCC command parameters, Table 2-31. Summary of PCC
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Specifying input parameters KCODE command: point to note The DBCODE command can be used in the same manner as KCODE. PCC command Enables you to create a table (or modify an existing standard table) of one-byte printer carriage control codes and define their action. NOTE: This command is ignored by the FreeFlow Print Server LCDS systems for both channel and TCP/IP processing. Carriage control (specifications such as Skip to Channel, Print, or Space 2 Lines) is accomplished by processing IBM channel commands, which have specific, well defined carriage control interpretations. However, if you specify the PCC command in a JSL created on your system, you can transfer the JSL file to another laser printing system for use with offline printing. All line spacing, skipping to channel, and printing actions are defined through this command. You can optionally specify an identifier of the ac type (having at least one alphabetic character) when defining the PCC table, and reference this identifier in the LINE PCCTYPE parameter. PCC command parameters The following table summarizes the PCC command parameters. Table 2-31. Summary of PCC command parameters Parameter Specifies ADJUST Defines the printer action for two successive channel skips CONSTANT Specifies user-assigned carriage control code exceptions to the default table. RECORD FORMAT Selects a table of printer carriage control codes. LENGTH Specifies the initial reference point for the first carriage control command. LMULT Makes inaccessible any unnecessary bits from the printer carriage control byte. Online Offline DJDE N Y N N Y N N Y N N Y N N Y N 2-30 Using LCDS Print Description Language