Xerox 6180N Using LCDS Print Description Language - Page 148
Record Postamble
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Specifying input parameters RECORD OFFSET Specifies the location of the record length field. Syntax RECORD OFFSET = value Options Table 2-44. RECORD OFFSET parameter options and definitions Option Definition value Specifies the number of bytes that the block length field is offset from the first byte of the record. The value is an integer in the range 0 to LENGTH-LTHFLD - 1. Default 0 RECORD POSTAMBLE Specifies the length in bytes of the extraneous data at the end of each tape record, measured from the end of the record backwards to the end of the last logical record. Syntax RECORD POSTAMBLE = length Options Table 2-45. RECORD POSTAMBLE parameter options and definitions Option Definition length An integer in the range of 0 to the record length that specifies the number of bytes that follow the last logical record to the end of each tape record. Default 0 RECORD PREAMBLE Specifies the length of the operating system portion of the record; that is, the byte offset from the first byte of a tape record to the first byte of the first logical record. Syntax RECORD PREAMBLE = length 2-40 Using LCDS Print Description Language