Xerox 6180N Using LCDS Print Description Language - Page 323
OUTPUT STOCKS, parameter: points, to note, OUTPUT SYSPPR, Syntax, Options, Default, Table 4-76.
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Specifying print format parameters OUTPUT STOCKS parameter: points to note • If the stocksetname does not reference a STOCKSET command coded earlier in the same JDL, the system assumes that the stockset exists as a .STK file in the "lcds" folder, which is read at print time. In this case, XJDC inserts a message in the listing file when the JSL is compiled, indicating that a .STK file will be used at print time. • Whenever a new stockset is chosen at the start of a report or through a JDE and JDL switch invoked by a DJDE, the system checks each stock to verify that the stock exists and can be made active. This verification provides an automatic method of changing stocks in the system as required by the data stream. OUTPUT SYSPPR Specifies the paper size for printing pages generated by the system (such as error sheets). Syntax OUTPUT SYSPPR = {USLEGAL | A3 | A4 | B4 | USLETTER | (x, y)} Options Table 4-76. OUTPUT SYSPPR parameter options and definitions Option Definition USLEGAL 8.5 by 14 inches / 216 by 279 mm A3 16.54 by 11.69 inches / 420 by 297 mm A4 8.27 by 11.69 inches / 210 by 297 mm B4 10.12 by 14.33 inches / 257 by 364 mm USLETTER 8.5 by 11 inches / 216 by 279 mm (x, y) User specified width and length. • x defines the width in inches, cm, dots, or Xdots. • y defines the length in inches, cm. dots, or Xdots. Default No default. Using LCDS Print Description Language 4-83