Xerox 6180N Using LCDS Print Description Language - Page 423

Using Dynamic Job Descriptor Entries (DJDEs) Options Table 5-58. SIDE DJDE options and definitions Option Definition sideopt side option. In duplex (with no BFORM): The four sideopt options produce the following results: NUFRONT The specified logical page is positioned as the first logical page on a new sheet. BACK The specified logical page is positioned as the first logical page of the next available back. NUBACK The specified logical page is positioned as the first logical page on the back of a new sheet. NEXT The specified logical page is positioned as the first logical page on the next available side: the back of the current sheet or the front of the next sheet. The logical page is moved unless it is already properly positioned as the first logical page on the specified side. In simplex, or in duplex with BFORM: The sideopt parameter is forced to NUFRONT, and the specified page is positioned as the first logical page. If the logical page is already properly positioned, a blank sheet is not created. offsetopt Specifies whether sheets containing repositioned logical pages will be offset in the stacker. The available offsetopt parameters are: • OFFSET Causes the sheet on which the repositioned logical page occurs to be offset. • NOFFSET No offset occurs. The default offset option is NOFFSET. SIDE DJDE: points to note • The SIDE DJDE takes effect at a logical page boundary. • The SIDE DJDE options are the same as for the RPAGE command, SIDE parameter. • The SIDE DJDE should be used instead of, not in conjunction with, the RPAGE command. It overrides both the RPAGE SIDE and ROFFSET parameters, if they apply to the next logical page. Thus, it triggers repositioning of only a single logical page and does not otherwise override the RPAGE SIDE or ROFFSET parameters on subsequent pages. Using LCDS Print Description Language 5-69