Xerox 6180N Using LCDS Print Description Language - Page 321
OUTPUT STAPLE, Syntax, Options, Table 4-74. OUTPUT STAPLE parameter options and definitions
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
Specifying print format parameters • If the stock is not an exact paper size match, but is larger than the specified size, selecting SEMIAUTO (or BEST) causes the printer to stop and wait for operator confirmation to continue printing, using the larger paper. Further mismatches of this type are ignored until: - The STOCKS parameter changes - End Of Report and no STOCKS parameter is in effect - End Of Job - The printer stops printing. The operator must either select Continue to confirm the larger paper or change the paper or the effective stock in order for the printer to resume printing. (The operator can also abort the report.) EXACT (or STOP) causes the report to be aborted if the printer does not halt printing. OUTPUT STAPLE Specifies that copy sets will be bound by a wire stitch on printers that are configured with a stitcher stacker option. Jobs can be offset and stapled simultaneously. (This command is ignored by the DP 100/115/135/155/180 EPS, because these systems do not have an internal stitcher. However, the command may be coded in a JSL that is compiled on the DP 100/115/135/155/180 EPS for use on another printing system that has a stitcher-stacker.) The Nuvera 100/120 MX DPS supports a single portrait staple. Syntax OUTPUT STAPLE = {NO | YES} Options Table 4-74. OUTPUT STAPLE parameter options and definitions Option YES NO Definition Specifies that a single wire stitch will be placed in sets of printed output. • LPS systems: Specifying STAPLE=YES forces the following parameter options: NTO1=YES, FACEUP=YES, and COLLATE=YES. • DP 75/90 systems: If a job requires N to 1 or face-up printing and STAPLE=YES has been specified, the system prints the job 1 to N and face down. Specifies that no stitching will occur. Using LCDS Print Description Language 4-81