Xerox 6180N Using LCDS Print Description Language - Page 251

Specifying print format parameters Default Built from the JDL name by adding ".JDL" to the name. ACCT DEPT parameter: point to note The department name (sc) is printed on the accounting sheet, and is entered into the accounting log for the report. ACCT USER Specifies the delivery destination of the one-page accounting summary for each report. This page is always printed in the same mode (duplex or simplex) as the report. Syntax ACCT USER = {BIN | TRAY | BOTH | NONE} Options Table 4-13. ACCT USER parameter options and definitions Option BIN TRAY BOTH NONE Definition Directs an accounting page to the output bin. Directs an accounting page to the sample tray. Directs an accounting page to the output bin and the sample tray. Specifies that no accounting page is delivered. Default BIN ACCT command: points to note • If the report completion code on the accounting page is other than Completed, an accounting page is delivered to the tray, even if USER=NONE is coded. This is done to notify you of a possible report integrity problem. • Accounting information is accumulated at processing time, not during printing. If the report does not complete successfully, use the Customer Accounting feature to obtain printing status. ACCT command example ACCT USER=BOTH, DEPT='MARKETING'; The command example above specifies that after each report is printed, an accounting page is delivered to both the output bin and sample tray. Using LCDS Print Description Language 4-11