Xerox 6180N Using LCDS Print Description Language - Page 318
OUTPUT SF2FUNCTION, Syntax, Options, Default, OUTPUT SHIFT, Table 4-71. OUTPUT SF2FUNCTION parameter
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
Specifying print format parameters OUTPUT SF2FUNCTION Specifies to the third party finisher whether or not it should perform the user-defined SF2 operation on the current report. This parameter provides control over third party finishing devices that conform to the DFA standard. You use it to invoke Finishing Function SF2 through the DFA channel C7. The user must specify what function SF2 will have. Refer to your finishing equipment vendor documentation for information on what function should be specified for your finisher. Syntax OUTPUT SF2FUNCTION = {NO | YES} Options Table 4-71. OUTPUT SF2FUNCTION parameter options and definitions Option YES NO Definition Instructs the finisher to initiate the user-defined SF2 Finishing Function on the current sheet. Specifies that Finishing Function SF2 will not be implemented on the current sheet. Default NO OUTPUT SHIFT Shifts the image of the data for three-hole paper, binding, finishing, and edgemarking. Specifies that the entire content of the page will be shifted, and the amount and direction of the shift. Image shift is the shifting of the image data (system page) relative to the physical page. This shifting is vertical for landscape pages and horizontal for portrait. Syntax OUTPUT SHIFT = {YES | NO | (v1, v2)} 4-78 Using LCDS Print Description Language