Xerox 6180N Using LCDS Print Description Language - Page 316
OUTPUT, PAPERSIZE, parameter, example, OUTPUT PURGE, Syntax
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Specifying print format parameters • PAPERSIZE=B4 and PAPERSIZE=(10.12,14.33) produce identical results because they indicate long edge feed, as opposed to short edge feed format. Refer to the "SEFFNT command" section in the "Specifying input parameters" chapter for detailed information on short and long edge feed. • To print on B5 and 7 by 10 inch paper sizes, the printer requires the 7 by 10 inch enablement kit (a hardware option) to be installed. • There are performance considerations when you are switching paper sizes across pitch modes. • The PAPERSIZE parameter is not supported as a DJDE. Therefore, a JDE page oriented DJDE that calls out the desired paper size is needed. • If the JSL specifies the paper size using the keyword method (such as USLEGAL, A4, or B4), the form coding must use the same terminology. If the JSL specifies 8.5,14 and your form specifies USLEGAL, an error message is displayed, indicating that the form paper size is too small or too large. USLETTER and B4 are the only sizes for which the keyword and the x, y expression do not create any incompatibilities. OUTPUT PAPERSIZE parameter example OUTPUT PAPERSIZE=USLETTER, FEED=MAIN, DUPLEX=NO, NUMBER=(1,1,80), FORMAT=SMPPOE; OUTPUT PURGE Specifies whether or not the system should delete graphic disk files at the end of report. This is applicable only to documents with interleaved graphics. Syntax OUTPUT PURGE = {NO | YES} 4-76 Using LCDS Print Description Language