Xerox 6180N Using LCDS Print Description Language - Page 159

Specifying input parameters TCODE DEFAULT Specifies an initial set of character type assignments for use with masked comparisons. You may specify default assignments for any standard character set by coding the appropriate keyword. Syntax ac: TCODE DEFAULT = {tcode Type | value} Options Table 2-53. TCODE DEFAULT parameter options and definitions Option tcode Type value Definition Available tcode type keyword parameters are: • ASCII • BCD • EBCDIC • PEBCDIC • IBMBCD An integer from 0 to 7. • If you specify 0, all the characters are untyped. • If you specify 1, all the characters are type 1. If you specify 7, all the characters are type 7, and so forth. Default No default TCODE DEFAULT parameter: points to note If you specify a tcode Type, this sets the following conditions: • All numeric characters (0 through 9) are type 1 characters. • All alphabetic characters (A through Z, a through z) are type 2 characters. • All other characters are untyped. TCODE TASSIGN Associates one or more specified characters with one or more specified type codes. May also be used to disassociate one or more characters from all type code assignments. Can be specified more than once in a TCODE command. Syntax ac: TCODE TASSIGN = {(typespec, 'inputspec') | (typespec, ('inputspec1' ['inputspec2'] [,...]))} Using LCDS Print Description Language 2-51