Xerox 6180N Using LCDS Print Description Language - Page 412
NUMBER DJDE example, OTEXT DJDE, Syntax, Options, Table 5-47. OTEXT DJDE options and definitions
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
Using Dynamic Job Descriptor Entries (DJDEs) • The options for the NUMBER DJDE are the same as for the NUMBER parameter of the OUTPUT JSL command. NUMBER DJDE example NUMBER=(1,1,40,1), END; OTEXT DJDE Specifies a text message to be output to the operator during job printing. It takes effect on the next page boundary. Type Page oriented Syntax OTEXT = {(sc [, {passnum | END}] [,WAIT]]) | NONE} or OTEXT = sc Options Table 5-47. OTEXT DJDE options and definitions Option Definition NONE Specifies that no text message is output to the operator during printing. sc String Constant. The text of the message that will be output to the operator. The message may have up to 80 characters, with a maximum of 400 characters per report. passnum pass number. Specifies the number of the pass (copy ply) to which the text applies. Multiple sc messages, one per passnum, may be specified in a JSL. The message is output to the operator immediately before the next page on the specified report ply starts printing. If no pass number is specified, the text is output only once, when the page begins to print. WAIT Suspends printing after the message is output, until the operator has responded by selecting or pressing a Continue button. END Displays the message text after the last copy of the report is printed. 5-58 Using LCDS Print Description Language