Xerox 6180N Using LCDS Print Description Language - Page 258

Specifying print format parameters There also may be multiple text specifications following a column specification. These are combined to form a single text string. • String position: Where a CME string constant is printed on a line depends upon where the POSITION and CONSTANT parameters are specified in the CME. If POSITION is specified before CONSTANT, the string constant is printed at the specified position. If POSITION is specified after CONSTANT, the string constant is printed at the current position (position 1 if no other POSITION or CONSTANT parameter has been specified), and a subsequent CONSTANT or FONT parameter takes effect at the specified POSITION. • Double byte font support: Double byte text strings are supported for the CME CONSTANT value if KCODE or DBCODE is specified for the VOLUME command. The maximum number of double byte characters is 127. • Copy sensitive CMEs: - On LPS systems: Copy sensitive CMEs are supported only for offline printing, because multiple passes are required to implement them. - On EPS systems: Copy sensitive CMES are supported for online as well as offline printing. Online jobs may be transmitted via channel or the Socket gateway. Only spooling queues may be used. NOTE: The entire job must be spooled to disk before the RIP process can start. This could cause the spool to become full if the job is extremely large. - Copy sensitive CMEs are not supported when COLLATE=NO is specified in the OUTPUT command. 4-18 Using LCDS Print Description Language