Xerox 6180N Using LCDS Print Description Language - Page 319
Options, Default, OUTPUT SHIFT, parameter: points, to note, OUTPUT SIZING, Syntax, Table 4-72.
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
Specifying print format parameters Options Table 4-72. OUTPUT SHIFT parameter options and definitions Option Definition v1 v2 YES NO value 1. An integer value in dots for the amount of shift on the simplex page or the odd (front) side of the duplex page. (Each dot is 1/300 of an inch.) The range for v1 is -75 to 75. value 2. A value in dots for the amount of shift on the even (back) side of a duplex page. The range for v2 is -75 to 75. Specifies that a shift occurs. A standard size shift occurs if YES is specified (v1=75 and v2= -75). Specifies that no shift occurs (v1=0 and v2=0). Default NO OUTPUT SHIFT parameter: points to note • If the origin of a print line is off the page, the printer prints as much of the line as possible and provides a message, once per report, indicating that printing is off the page. • Graphics and logos are not allowed to start off the page. If they are positioned at a point that is outside the page boundary, an error message is displayed. OUTPUT SIZING Specifies how the system matches the paper sizes in the output bins and how it responds to paper and bin size mismatches. When a stock has more than one tray assignment, and these trays contain different size paper, the system tries to match the paper sizes in the trays. You can specify one of the following options based on whether or not the printer will be attended by an operator during printing. Syntax OUTPUT SIZING = {SEMIAUTO | STOP | BEST | EXACT} Using LCDS Print Description Language 4-79