Xerox 6180N Using LCDS Print Description Language - Page 363

Using Dynamic Job Descriptor Entries (DJDEs) • JDE • JDL • DUPLEX=NO • FEED Effect of multiple logical pages If you use multiple PDE BEGIN commands to define multiple logical pages on one physical page (as described in the PDE command description in the "Specifying print format parameters" chapter), consider the following: • With the exception of DEPT and SHIFT, all page oriented DJDEs are applied at a logical page boundary. • The following DJDEs cause the current page position to be set to the first logical page of the front side of a new physical sheet: - DUPLEX - COPIES - JDL - JDE - OTEXT - RTEXT - FEED • The following DJDEs cause the current page position to be set to the first logical page of the next physical side: - FORMS - FORMAT - BEGIN - PMODE - FONTS Header pages and online DJDEs If an online job has header pages only (no trailers), DJDEs that are invoked within a report remain in effect for the first header page of the following report; however, they do not remain in effect beyond the end of that header page. These conditions occur because the end of the first report is not detected until the first header page of the following report is received and processed. Using LCDS Print Description Language 5-9