Xerox 6180N Using LCDS Print Description Language - Page 302

Specifying print format parameters Table 4-60. OUTPUT INVERT parameter options and definitions (Continued) Option BOTH NONE Definition Specifies page inversion on front and back sides. Turns page inversion off. Default NONE OUTPUT IRESULT Specifies what the result will be when objects that are imaged with different inks overlap. Syntax OUTPUT IRESULT = {BLACK | COLOR} Options Table 4-61. OUTPUT IRESULT parameter options and definitions Option Definition BLACK Specifies that, when two objects that are imaged with different inks overlap, and black and colored pixels coincide, the resulting pixel is black. COLOR Specifies that, when two objects that are imaged with different inks overlap, and black and colored pixels coincide, the resulting pixel is colored. Default The ink priority that was chosen at installation. OUTPUT IRESULT parameter: points to note • For monochrome printers such as the DP EPS, the COLOR and BLACK parameters produce identical results (black). • The FreeFlow Print Server-based DT 128/155/180 HLC Printing Systems have queue settings for this option. The default setting is black. • The color that results from overlapping objects may be only black or a color for an entire page. For example, a page cannot have red text printed over a black background and also black text printed over a red background. • The IRESULT can be specified on a page basis with the IRESULT DJDE. If more than one IRESULT is specified on a page, the last instance takes precedence. 4-62 Using LCDS Print Description Language