Xerox 6180N Using LCDS Print Description Language - Page 290

Specifying print format parameters OUTPUT COVER Specifies that cover sheets are to be fed from the AUX stock. These cover sheets may be placed at the front or back of each copy of a report. Syntax OUTPUT COVER = {(FRONT [, SEP]) | BACK | (BOTH [, SEP]) | NONE} Options Table 4-47. OUTPUT COVER parameter options and definitions Option Definition NONE Specifies that no cover sheets are to be fed. FRONT Specifies that a cover sheet will be fed as the first page of each report copy. SEP Specifies that no data will be printed on any front cover sheet. BACK Specifies that a cover page will be fed at the end of each copy. No report data is printed on back covers. BOTH Specifies that both front and back cover pages will be fed for each report copy. The front cover sheet will be the first page of each copy. Default NONE OUTPUT COVER parameter: point to note If RTEXT is specified along with (FRONT, SEP) or (BOTH, SEP), RTEXT pages are printed on the covers, and front covers are picked only on copies for which there is RTEXT. Refer to the "ROUTE RTEXT" parameter section later in this chapter for further details on RTEXT. Refer to "Restrictions on job parameter modification" in the "Using Dynamic Job Descriptor Entries (DJDEs)" chapter for more information on COVER specified in a selected JDE. OUTPUT CYCLEFORMS Specifies a set of forms to be printed on report pages in a repeating sequence. Syntax OUTPUT CYCLEFORMS = {NONE | formid | (formid1 [, (INKS, inkref1 [inkref2 formid2 [, (INKS, inkref1 [inkref2 4-50 Using LCDS Print Description Language