Xerox 6180N Using LCDS Print Description Language - Page 271

Specifying print format parameters LINE INKINDEX parameter: points to note • The FreeFlow Print Server LCDS systems support only the offset option for the LINE INKINDEX parameter. • When the bitopt option is specified, the initval must also be specified. • The printer permits an entire line or a portion of a line to be printed in highlight color. You can specify highlight color for variable data on a form. (This is analogous to the output capability of font switching.) Variable data is printed using the ink that is specified in the INKINDEX byte. If the INKINDEX byte is blank or does not exist in the variable data record, the variable data is printed using the default ink. LINE INKINDEX parameter example LINE DATA=(1,132), FONTINDEX=133, INKINDEX=143; LINE LPI Specifies the line spacing values for each line. Syntax LINE LPI = {(linespacing {LPI | DOTS | XDOTS}) | (linespacing {LPI | DOTS | XDOTS}, lineno, (...))} Options Table 4-33. LINE LPI parameter options and definitions Option Definition linespacing Specifies the line spacing value. May be measured in: • LPI (lines per inch) • DOTS • XDOTS (600 dpi) The default unit is LPI. lineno line number Specifies the line number or numbers over which the line spacing will be applied. The options are: • n Number of the line to which the specified linespacing will be applied • n- Number of the line from which the specified linespacing will be applied through BOF (bottom of form). • n-m The specified linespacing will be applied from line n through line m. Using LCDS Print Description Language 4-31