Xerox 6180N Using LCDS Print Description Language - Page 389

Using Dynamic Job Descriptor Entries (DJDEs) When FONTINDEX is specified, the line spacing of the first line of a report is determined by the font indicated by the font index value in the first line of the report. If there is no font index value in the record and FONTINDEX is specified, the line spacing for the first line of the report is determined by the first font in the PDE. When the FONTINDEX or CMEs are specified, the line spacing of the first line of subsequent pages is determined by the line spacing of the font called out by the last font index of the previous page applied to the current font list. If a FORMAT DJDE has occurred before the page transition, the font used for the line spacing comes from this list. FONTS DJDE Specifies the fonts to be used in printing variable input data or CME data. Type Page oriented Syntax FONTS = {(f1[, f2 f1, s1[, unit]) [, (f2, s2 [, unit or FONTS = (sbf [, s1 [unit dbf [*vn [*hn]] [, s1 [unit]] [, {Ai | DBi | Ki}] [, c1 [unit Options Table 5-25. FONTS DJDE options and definitions Option Definition f font. Specifies a one to six alphanumeric character identifier (consisting of at least one letter) corresponding to a font catalogued on the system disk. sbf single byte font. Specifies a one to six alphanumeric character identifier (consisting of at least one letter) corresponding to a single byte font catalogued on the system disk. dbf double byte font. Specifies a one to six alphanumeric character identifier (consisting of at least one letter) corresponding to a double byte font catalogued on the system disk. i index. Specifies the font index for a double byte character set. Can be 1 through 8. Using LCDS Print Description Language 5-35