Xerox 6180N Using LCDS Print Description Language - Page 174
Volume Optimize
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Specifying input parameters Options Table 2-71. VOLUME MINLAB parameter options and definitions Option Definition value Specifies in bytes the maximum length of the smallest physical block. The value can range from 1 to 4095 bytes. The specified value must be less than the MAXLAB value and must not exceed the BLOCK LENGTH. Default 80 VOLUME OPTIMIZE Enhances the performance of the data stream. NOTE: This parameter is supported only partially by the FreeFlow Print Server LCDS systems. The parameter options table below reflects only the options that are supported. Syntax VOLUME OPTIMIZE = {NCCHECK | NONE} Options Table 2-72. VOLUME OPTIMIZE parameter options and definitions Option Definition NCCHECK NCCHECK Disables channel 9 and channel 12 detection. When this option is selected. the host is not notified by the printing system each time channel 9 or 12 is recognized. Any skips to channel 9 or 12 are allowed as for any other channel. NOTE: This option is supported on the FreeFlow Print Server LCDS systems only for Fuji Xerox markets. All other DP systems process it as NONE. NONE No optimization actions are taken. VOLUME OPTIMIZE parameter: Point to note The NCCHECK option is supported for FreeFlow Print Server LCDS systems only for Fuji Xerox markets. It is processed in other markets as if NONE were specified. 2-66 Using LCDS Print Description Language