Xerox 6180N Using LCDS Print Description Language - Page 245

Specifying print format parameters ABNORMAL IMISMATCH Specifies the action for a highlight color printer to take when a specified ink requires a primary ink color that is not currently loaded. NOTE: IMISMATCH is a highlight color parameter that is recognized by printers such as the Xerox 4850 and 4890, as well as the Xerox DT 128/155/180 HighLight Color Printing Systems. It may be included in JSLs that are created on the FreeFlow Print Server LCDS systems for highlight color printing. If the system encounters this parameter when printing, it is ignored. Syntax ABNORMAL IMISMATCH = {ABORT | CONTINUE | STOP} Options Table 4-6. ABNORMAL IMISMATCH parameter options and definitions Option Definition ABORT Specifies that the system displays a message for the abnormal condition and aborts only the report it is processing (not the entire job) without offering the operator the choice of resuming printing or canceling the job. CONTINUE Specifies that the system displays a message defining the abnormal condition and resumes printing the current report with the ink that is currently loaded, overriding the ISUBSTITUTE parameter and any forms creation commands that specify no ink substitution. STOP Specifies that the system displays a message prompting the operator to load the requested primary ink or to abort the job. The printer stops printing the report and waits for the operator to resume printing (with or without changing inks) or cancel the job. Default STOP ABNORMAL IMISMATCH parameter: point to note If a report does not contain an ink list in the JDE, printing may start before the system is aware of the primary colors that are needed. For example, page 100 of a report that was designated black only may specify the green primary when the ink loaded in the printer is red. This would create an IMISMATCH condition. Using LCDS Print Description Language 4-5