Xerox 6180N Using LCDS Print Description Language - Page 185

Using logical processing Each constant that is included in a referenced TABLE command is examined by the system to see if it is equal in value to the input data field specified in the CONSTANT parameter of the CRITERIA command. NOTE: The TABLE command must precede any CRITERIA command that references it. This command requires an identifier of the type ac (at least one alpha character required). TABLE command parameters The following table summarizes the TABLE command parameters. Table 3-2. Summary of TABLE command parameters Parameter TABLE CONSTANT TABLE MASK Specifies Online Offline DJDE Defines string constants against which input Y data fields are checked for logical processing. Y N Permits character positions of a string to be Y Y N ignored or tested for type attributes. The following section describes the syntax of the TABLE command parameters and explains their options. TABLE CONSTANT Specifies the content of one or more string constants. Syntax ac: TABLE CONSTANT = {sc | (sc1 [, sc2] [,...])} Options Table 3-3. TABLE CONSTANT parameter options and definitions Option Definition sc string constant. sc is a string composed of literal characters and masking characters (as defined by the MASK parameter of the TABLE command). All string constants must be of the same length in bytes. The number of bytes for all constants in the table (after conversion of any hexadecimal or octal constants) is limited to 255 bytes. Default No default Using LCDS Print Description Language 3-5